詳細產品規格表，請連結以下圖示檔案

Surge tester with 6, 12, 15, 25, 30, 40 or 50 kV

A deep look into the winding – the ultimate surge tester.
No other tester offers so much performance variety.

The MTC2 – ideal for laboratory, workshop and automation.
Perfectly enhanced with resistance, partial discharge, insulation resistance and high voltage testing.

Reliably test stators, armatures, coils and windings of all kinds.

More than 40 years of pioneering spirit, know-how, consistent optimization and permanent R & D activities of our engineers and technicians are the basis for this state-of-the-art surge tester.
Designed & Made in Germany.

Intuition – Function – Perfection.

The MTC2 is our premium surge voltage tester – no other tester offers such a diversity of features. With the MTC2 you inspect coils, stators, armatures and all kinds of windings according to the latest state of the art – uncompromising and precise.

Innovations, technology lead and a patented analytical method for surge voltage characterize the MTC2-surge voltage testers of the 6th generation.
A finely graduated variety of testers from 6 kV up to 50 kV  is available.

Based on 25 years experience, extensive know-how and consistent optimization you get THE “state-of-the-art surge voltage tester”.

What makes the MTC2 so special?

4 connection leads

4 connection leads offer the possibility to contact all relevant winding connections at the same time. The 3 phase connections and the neutral point are connected to the 4 connection leads.  In this way it is possible to achive a unique test accuracy.

Automatic test method switch-over

As soon as the test object is connected, the MTC2 automatically measures at all 4 connections. Thanks to the integrated test method switchover, there´s no need for manual re-clamping. This saves time and avoids mistakes.

Advanced surge voltage

The surge voltage test with standard-compliant rise time leaves no defect undetected. Modern, automatic evaluations facilitate the fault analysis.

Optional partial discharge test with surge voltage 

The innovative, standard-compliant partial discharge test can easily be integrated. It gives you information about critical insulation weaknesses and the suitability for operation with frequency converters.  SCHLEICH pursues two strategies to obtain good test results at stators as well as at entirely-assembled motors: Measurement via coupler in the measuring lead (perfect for motors) and measurement via antenna (perfect for stators).

Optional precise resistance measurement in 4-wire-technology

To achieve precise measuring results by comparing the three phases´resistances , the resistance is measured in 4-wire technology.  Of course, the 4-wire technolgy is also applied by means of the automatic test method switchover!

Optional high-voltage test with AC 

In addition, you can also perform a high-voltage test with AC.  Of course,  the automatic test method switchover is also applicable in this case. 

Optional rotor- / stator test

The measuring technology allows you to find faults in rotors or stators and to detect broken bars in the squirrel-cage rotor.

Product overview