- 電池電壓範圍:500-850Vdc
- 交流電壓:
◎併網: 480V
◎孤島模式: 480V
◎頻率: 60Hz(59.5Hz~60.5Hz) - 尺寸: 800*800*2000mm
| Model | PWS1-100K-NA |
| 併網模式 | |
| 電池電壓範圍 | 500~850V |
| 最大直流電流 | 220A |
| 交流電壓 | 480V(423V~528V) |
| 交流電流 | 120A |
| 額定功率 | 100kVA |
| 交流頻率 | 60Hz(59.5Hz~60.5Hz) |
| 輸出 THDi | ≤3% |
| 交流功率因數 | Listed: 0.8~1 leading or lagging (可控) |
| Actual: 0.1~1 leading or lagging (可控) | |
| 孤島模式 | |
| 電池電壓範圍 | 500~850V |
| 最大直流電流 | 220A |
| 交流輸出電壓 | 480V(±10% configurable) |
| 交流輸出電流 | 120A(Max 132A) |
| 額定交流輸出功率 | 100kVA |
| 最大交流功率 | 110kVA |
| 輸出 THDu | ≤2% |
| 交流頻率 | 60Hz |
| 交流功率因數 | Listed: 0.8~1 leading or lagging (Load-depend) Actual: 0.1~1 leading or lagging (Load-depend) |
| 過載能力 | 105%~115% 10分鐘; 115%~125% 1分鐘; 125%~150% 200毫秒 |
| 基本規格 | |
| 冷卻 | 強制風冷 |
| 噪音 | 70dB |
| 外殼 | IP20 |
| 最高海拔 | 3000m/10000feet (> 2000m/6500feet derating) |
| 操作溫度 | -20°C to 50°C (45°C以上降額） |
| 濕度 | 0~95% (無冷凝) |
| 尺寸 (W*H*D) | 800*2160*800mm |
| 重量 | 680kg |
| 安裝 | 落地式 |
| 其他 | |
| 峰值效率 | 95.80% |
| CEC 效率 | 94% |
| 保護 | OTP, AC OVP/UVP, OFP/UFP, EPO, AC 相位反轉, 風扇/繼電器故障、OLP、GFDI、防孤島 |
| 可配置的保護限制 | 交流電壓/頻率上限/下限，電池 EOD電壓 |
| 交流連接 | 3相4線 |
| 顯示 | 觸控螢幕 |
| 通訊 | RS485,CAN,乙太網路 |
| 絕緣 | 內建變壓器 |
| 認證 | ETL 符合 UL1741/UL1741SA,UL9540, CPUC RULE 21, IEEE1547,HECO RULE 14H,CEC,CSA22.2, HECO CGS, HECO CSS |
| 短路 | |
| 故障電流 | 400A |
| 故障持續時間 | 100ms |
- Modular design and wide power range in single cabinet
- Bi-directional Power Conversion System
- Built-in transformer for direct grid connection
- Grid-support functions
- Virtual Synchronous Generator (VSG) technology optional
- Support various battery
| Model | PWS1-100K-NA |
| Utility-interactive Mode | |
| Battery voltage range | 500~850V |
| DC Max Current | 220A |
| AC voltage | 480V(423V~528V) |
| AC current | 120A |
| Nominal power | 100kVA |
| AC frequency | 60Hz(59.5Hz~60.5Hz) |
| Output THDi | ≤3% |
| AC PF | Listed: 0.8~1 leading or lagging (Controllable) |
| Actual: 0.1~1 leading or lagging (Controllable) | |
| Stand-alone Mode | |
| Battery voltage range | 500~850V |
| DC Max Current | 220A |
| AC output voltage | 480V(±10% configurable) |
| AC output current | 120A(Max 66A) |
| Nominal AC output power | 100kVA |
| AC Max Power | 110kVA |
| Output THDu | ≤2% |
| AC frequency | 60Hz |
| AC PF | Listed: 0.8~1 leading or lagging (Load-depend) |
| Actual: 0.1~1 leading or lagging (Load-depend) | |
| Overload Capability | 105%~115% 10min; |
| 115%~125% 1min; | |
| 125%~150% 200ms | |
| Physical | |
| Cooling | Forced air cooling |
| Noise | 70dB |
| Enclosure | IP20 |
| Max elevation | 3000m/10000feet (> 2000m/6500feet derating) |
| Operating temp. | -20°C to 50°C (De-rating over 45°C） |
| Humidity | 0~95% (No condensing) |
| Size (W*H*D) | 800*2160*800mm |
| 31.5*85*31.5 inches | |
| Weight | 680kg |
| Installation | Floor standing |
| Other | |
| Peak efficiency | 95.50% |
| CEC efficiency | 94% |
| Protection | OTP, AC OVP/UVP, OFP/UFP, EPO, AC Phase Reverse, Fan/Relay Failure, OLP, GFDI, Anti-islanding |
| Configurable protection limits | Upper/Lower AC Voltage/Frequency limit, Battery EOD voltage. |
| AC connection | 3-Phase 4-Wire |
| Display | Touch Screen |
| Communication | RS485,CAN,Ethernet |
| Isolation | Built-in Transformer |
| Certification | ETL listed conforming to UL1741/UL1741SA,UL9540, CPUC RULE 21, IEEE1547,HECO RULE 14H,CEC,CSA22.2, HECO CGS, HECO CSS |
| Short circuit | |
| Fault current | 400A |
| Fault duration | 100ms |