f Reactor Classic包括5個連續攪拌釜式反應器 (CSTR)，每個容量為 1.8 mL。由標準磁熱板攪拌器提供加熱和混合，用於驅動模塊周圍的試劑的流體泵（例如 HPLC、注射器、蠕動泵、齒輪）。
f Reactor Classic將管流處理的效率與CSTR的高級混合相結合，提供了一種通用的“隨插即用”設置，非常適合多相反應；幾乎不需要專業知識就能允許化學家探索連續流動處理。
套件包括：
- 5個容量1.8 mL 的PEEK f Reactor Classic 模塊
- 1個帶熱電偶孔和保護屏的鋁製固定板
- 15個氟橡膠O型圈
- 6個PTFE 交叉攪拌棒
- 20個帶ETFE套圈的線圈管PEEK接頭
- 15個Tefzel盲蓋
- 2.5 m PTFE管
- 1個管切割器
- 1個六角扳手
有關 fReactor Classic 的更多資訊，包括使用該平台進行的不同反應類型的示例，請參見：Org. Process Res. Dev. 2017, 21, 9, 1294-1301.
有關流動化學原理以及 fReactor Classic 平台如何融入其中的更多資訊，請訪問 www.freactor.com
使用我們還提供的以下附件完成您的設置：
- Kalrez O形環
- 背壓調節器
- 洩壓閥
- 加熱板攪拌器
- 注射泵
fReactor Classic includes 5 x Continuous Stirred Tank Reactors (CSTR) of 1.8 mL volume each. Heating and mixing are provided by a standard magnetic hotplate stirrer and fluidic pumps (e.g. HPLC, syringe, peristaltic, gear) are used to drive the reagents around the modules.
Integrating the efficiency of pipe-flow processing with the advanced mixing of a CSTR, the fReactor Classic delivers a general “plug-and-play” setup which is well-suited to multiphasic reactions; allowing chemists to explore continuous-flow processing, with little expertise required.
Kit comprises:
- 5 x PEEK fReactor Classic modules, each 1.8 mL
- 1 x aluminium holding plate with thermocouple hole & protective screen
- 15 x Viton o-rings
- 6 x PTFE cross stirrer bars
- 20 x flangeless PEEK fittings with ETFE ferrules
- 15 x Tefzel blanking plugs
- 2.5 m x PTFE tubing
- 1 x tube cutter
- 1 x hex key
Further information on the fReactor Classic, including examples of different reaction types conducted using the platform, can be found in: Org. Process Res. Dev. 2017, 21, 9, 1294-1301.
For further information on the principles of flow chemistry and how the fReactor Classic platform fits into this please visit www.freactor.com
Complete your setup with the following accessories that we also provide:
- Kalrez O-rings
- Back pressure regulators
- Pressure relief valves
- Hotplate stirrers
- Syringe pumps