Hydraulic bench for static/burst tests and pulsing pressure tests without water circulation.

Main features

• Maximun pressure 100 bar - maximum frequency 2 Hz
• Special version up to 600 bar

The BPF series test benches have been designed to carry out single test or life test on hydraulic components.
With the BPF benches is possible to read and measure the hydraulic characteristics in real operative conditions.

The benches are designed to simulate pressure variation with possibility to adjust the water temperature and air chamber temperature, the test are performed according the most relevant international Standards.

It is possible to implemented the benches with additional equipments and software in order to perform flow-rate tests, thermal cycle and traction tests on tubes and hoses, ecc..

ydraulic bench for static/burst tests and pulsing pressure tests without water circulation and without personal computer

Main features

• Maximum pressure 100 bar - maximim frequency 2 Hz
• Special version up to 600 bar
• The bench is designed to generate hydraulic pressure using water, increase of pressure is obtained by a servo piloted pneumatic/hydraulic booster.
• The initial pressurization of the test rig is made by the external water supply network.
• The bench can perform manual static pressure tests and pulsing pressure tests with cycle count and cycle check made by PLC.