簡介
Type MRE-MREG
- Suitable for outdoor use - closed system
- Casing completely stainless steel
- Without electrical auxiliary energy
SIKA quality pressure gauges in industrial version with 100, 160 or 250 mm stainless steel casing are suitable for pressure measurement of gaseous and liquid media, but not for highly viscous or crystallising media.
DIN display ranges available from -1...0 bar up to 0...1,600 bar (up to...1,000 bar, brass connection; up to...1,600 bar with stainless steel connection). We manufacture special ranges on request.
The stainless steel casing is available either as a bayonet ring case (type MRE) or as a cramped-on ring case (type MRE-G)
| Technical data | |
| Type | MRE / MRE-g |
| Version | Bayonet ring case or crimped-on ring case |
| Nominal size | 63 mm |
| Accuracy | EN 837-1, class 1.6 and class 2.5 (for display ranges 0...600 bar and 0...1000 bar) |
| Medium / Application | Liquid and gaseous media |
| Process connection | Thread see table , brass, optional stainless steel |
| Measurement system | Bourdon spring bronze, optional stainless steel |
| Degree of protection according to EN 60529 | IP54 (IP65 for filled cases with closed pressure compensation insert) |
| Ambient temperature | -40 to 60 °C (-20 to 60 °C with case filling) |
| Storage temperature | -40 to 70 °C (-20 to 70 °C with case filling) |
| Medium temperature | Devices with brass connection max. 60 °C Devices with stainless steel connection max. 200 °C (max. 100 °C with case filling) |
| Nominal use temperature | 20 °C* |
| Pressure load capacity | Of full-scale value |
| g Resting load g Dynamic load g Overload |
75 % 65 % Max. |