產品介紹∣絶緣油真空純化濾油機
Search

絶緣油真空純化濾油機
EHV Transformer Oil Purifier/Degasification

【Enervac】變壓器絶緣油再生、SF6氣體回收裝置 變壓器絶緣油純化系統系列

絶緣油真空純化濾油機

簡介

EHV series

  • 將新的及用過的電絶緣液體、變壓器油與矽油升級。
  • 高真空處理程序去除游離與溶解水。
  • 去除游離與溶解氣體及顆粒物質。
  • 提供移動式與固定式機型尺寸200~23,000 l/h。

我要諮詢
  • ENERVAC變壓器絕緣油純化機的高真空程序,用於電絕緣液體的脫水除氣(包括變壓器油、聚丁烯及矽油),以增加及維持其絕緣強度。此過程包括去除游離與溶解水、溶解空氣與氣體及顆粒物質。
  • 高真空除氣機(變壓器絶緣油純化機)的最重要應用,是在超高壓輸電及電氣設備的製造領域。此外,高真空程序還用於電纜油的除氣方面,包括聚丁烯。除了電力產業之外,此程序還用於電子與雷達設備用油、真空泵浦密封油、煞車油及冷凍油 - 含磷酸酯與矽油。
  • 提供移動式與固定式機型尺寸200~23,000 l/h。
  • 應用:
    • 最重要的應用,是在超高壓輸電及電氣設備的製造領域。
    • 用於電纜油的除氣方面,包括聚丁烯。
    • 用於雷達與電子設備用油、真空泵浦密封油、煞車油及冷凍油的脫水與除氣 - 含磷酸酯與矽油。
    • Enervac提供EHV真空純化濾油機系列,其設計目的在使您的操作達到最大的效率...性能經專家測試,僅需最少的維護,並提供長期的無故障服務。
    • 仰賴著Enervac公司技術專家的全部資源支持,加上專業知識及深入的研究,成就了您獨一無二的真空純化濾油系統,其設計,適用於無人值守的操作及通電的設備,也提供完整的監控設備。
  • EHV系列典型可達到的性能如下:
    • 脫水:在最低的油溫27℃時,水份可從50 ppm去除到小於5ppm。
    • 除氣:可降低溶解的空氣含量從完全飽和的大約12%到小於0.25%。
    • 濾除微粒物質:標準的後濾器(after-filter)可過濾到小至0.5微米。
    • 濾除其它污染物質:在系統增加選購的漂白土過濾器,可以濾除例如油氧化與熱分解產物、溶解清漆、塗料及酸類等污染物質。
  • 特殊選購:ENERVAC EHV系列是極為客製化的,提供多種選購,例如:
    • 額外的加熱器容量,以達到更快速的溫升。
    • 出口加熱器,以協助維持變壓器溫度。
    • 柴油或燃氣鍋爐,以將功耗降至最低。
    • 機載發電機。
    • 機載漂白土過濾系統(E575A系列)。
    • 管內介電強度測試器。
    • 管內RGA。
    • 全空調型操作室。
  • 詳細規格、配件及選購,歡迎洽詢。
  • Upgrading of new and used electrical insulating liquids, transformer oils & silicones.
  • High Vacuum process removes free and soluble water.
  • Removes free and dissolved gases and particulate matter.
  • Mobile and stationary units available in sizes from 200 to 23,000 l/h.
  • ENERVAC’s (transformer oil purifier) high vacuum process is used for the dehydration and degasification of electrical insulating liquids including transformer oils, polybutene and silicone fluids, to increase and maintain their dielectric strength. The processing includes the removal of free and soluble water, dissolved air and gases and particulate matter.
  • The most important applications of high vacuum (transformer oil purification) degasifiers (transformer oil purifiers) are in the field of extra high voltage transmission and in the manufacture of electrical apparatus. In addition, the high vacuum process is used in the degasification of cable oils including polybutene. Outside of the electrical industry, this process is used for electronic and radar equipment, vacuum pump sealing oils, brake fluids and refrigeration oils – including phosphate esters and silicones.
  • Mobile and stationary units are available in sizes 200 to 23,000 l/h.
  • Applications:
    • The most important applications of high vacuum degasifiers are in the field of extra high voltage transmission and in the manufacture of electrical apparatus for it.
    • In addition, the high vacuum process is used in the degasification of cable oils including polybutenes.
    • Outside of the electrical industry, this process is used for dehydration and degasification of oils for radar and electronic equipment, vacuum pump sealing oils, brake fluids, refrigeration oils - including phosphate esters and silicones.
    • Enervac offers the EHV Vacuum Oil-Purifier series designed for maximum efficiency in your operations…performance tested by experts, requiring minimum maintenance, and providing long, trouble-free service.
    • Backed by the full resources of Enervac’s technical specialists, plus “know-how” and thorough research, your Vacuum Oil-Purifier is unique. Designed for unattended operation and suitable for operation on energized equipment—complete monitoring equipment is also available.
  • The typical performance achieved with the EHV series is:
    • Dehydration—at minimum oil temperatures of 27°C the water removal is from 50 ppm to less than 5 ppm.
    • Degasification—reduce soluble air content from full saturation of approximately 12% to less than 0.25%.
    • Particulate matter—standard after-filter provides filtration down to 0.5 micron
    • Other contaminants such as products of oil oxidation, thermal degradation, dissolved varnishes, paints and acids can be removed by the addition of optional Fullers Earth filters to the system.
  • Special Options: ENERVAC units are extremely customisable, some of the options that are available include:
    • Extra heater capacity for faster temperature rise
    • Outlet heater to assist in maintaining transformer temperature
    • Diesel or gas boiler to minimise power consumption
    • Onboard power generator
    • Onboard Fullers Earth system (E575A series)
    • Inline dielectric strength tester
    • Inline RGA
    • Fully air-conditioned operators cabin
  • Please feel free to contact for detailed specifications, accessories and options.