產品介紹∣高性能絶緣油真空純化濾油機

ENERVAC變壓器絕緣油純化機的高真空程序，用於電絕緣液體的脫水除氣(包括變壓器油、聚丁烯及矽油)，以增加及維持其絕緣強度。此過程包括去除游離與溶解水、溶解空氣與氣體及顆粒物質。
高真空除氣機(變壓器絶緣油純化機)的最重要應用，是在超高壓輸電及電氣設備的製造領域。此外，高真空程序還用於電纜油的除氣方面，包括聚丁烯。除了電力產業之外，此程序還用於電子與雷達設備用油、真空泵浦密封油、煞車油及冷凍油 - 含磷酸酯與矽油。
提供移動式與固定式機型尺寸50～6000 GPH (190～23,000 l/h)。
單次通過Enervac真空系統的典型性能如下：
- 脫水：在最低油溫30.5℃ (80° F)時，水份可從100 ppm去除到小於5ppm。
- 除氣：Enervac真空純化濾油機在單次通過中，可降低溶解空氣含量從完全飽和的大約12%降低到小於0.25%，也去除含油溶液中的其他氣體，包括可燃物。
- 濾除顆粒物質：加速器過濾匣可去除顆粒物質至標稱5微米。在真空箱下游增加濾芯，可去除顆粒物質至次微米大小。
- 濾除其它污染物質：在系統增加漂白土過濾器，可以濾除例如油氧化與熱分解產物、溶解清漆、塗料及酸類等污染物質。
應用：
- 最重要的應用，是在超高壓輸電領域及電氣設備的製造方面。
- 用於電纜油的除氣方面，包括聚丁烯。
- 用於雷達與電子設備用油、真空泵浦密封油、煞車油及冷凍油的脫水與除氣 - 含磷酸酯與矽油。
- Enervac提供的真空純化系統，其設計目的在使您的操作達到最大的效率...性能經專家測試，僅需最少的維護，並提供長期的無故障服務。
- 憑藉著Enervac公司技術專家的全部資源支持，加上專業知識及透徹深入的研究，成就了您獨一無二的真空純化系統，其設計，適用於無人值守的操作及通電的設備，也提供完整的監控設備。

容量：標準機型50 gph～3600 gph，可洽詢更大容量或特殊應用機型。
單次通過性能：
- 標準性能：使用新油，含水量100ppm及完全的空氣飽和至體積的12%。
  - 總含水量：最大10 ppm，依ASTM Method D-1533執行。
  - 總含氣量：最大0.25%，依ASTM Method D-2945執行。
  - 介電質崩潰：最小40 kV，依ASTM Method D-877執行。
- 選購性能：使用新油，含水量50ppm及完全的空氣飽和至體積的12%。
  - 總含水量：最大5 ppm，依ASTM Method D-1533執行。
  - 總含氣量：最大0.15%，依ASTM Method D-2945執行。
  - 介質崩潰：最小60 kV，依ASTM Method D-877執行。
詳細規格、配件及選購，歡迎洽詢。

Upgrading of new and used electrical insulating liquids, transformer oils & silicones.
High Vacuum process removes free and soluble water.
Removes free and dissolved gases and particulate matter.
Mobile and stationary units available in sizes from 50 to 6,000 GPH.
ENERVAC’s (transformer oil purifier) high vacuum process is used for the dehydration and degasification of electrical insulating liquids including transformer oils, polybutene and silicone fluids, to increase and maintain their dielectric strength. The processing includes the removal of free and soluble water, dissolved air and gases and particulate matter.
The most important applications of high vacuum (transformer oil purification) degasifiers (transformer oil purifiers) are in the field of extra high voltage transmission and in the manufacture of electrical apparatus. In addition, the high vacuum process is used in the degasification of cable oils including polybutene. Outside of the electrical industry, this process is used for electronic and radar equipment, vacuum pump sealing oils, brake fluids and refrigeration oils – including phosphate esters and silicones.
Mobile and stationary units are available in sizes 50 to 6000 GPH (190 to 23,000 l/h).
Single-Pass Performance: The typical performance in a single pass through an Enervac vacuum system is as follows:
- Dehydration—At minimum oil temperatures of 80° F the water removal is from 100 ppm to less than 10 ppm.
- Degasification—Enervac vacuum oil purifiers reduce soluble air content in a single pass from full saturation of approximately 12% to less than 0.25%. Other gases in solution with oil, including combustibles, are also removed.
- Particulate matter—The accelerator cartridge provides removal of particulate matter to a nominal 5 microns. The addition of a filter downstream of the chamber will remove particulate matter to submicronic size.
- Other contaminants such as products of oil oxidation, thermal degradation, dissolved varnishes, paints and acids can be removed by the addition of Fullers Earth filters to the system.
Applications:
- The most important applications of high vacuum degasifiers are in the field of extra high voltage transmission and in the manufacture of electrical apparatus for it.
- In addition, the high vacuum process is used in the degasification of cable oils including polybutenes.
- Outside of the electrical industry, this process is used for dehydration and degasification of oils for radar and electronic equipment, vacuum pump sealing oils, brake fluids, refrigeration oils—including phosphate esters and silicones.
- Enervac offers the Vacuum-Purifier System designed for maxi mum efficiency in your operations…performance tested by experts, requiring minimum maintenance, and providing long, trouble-free service.
- Backed by the full resources of Enervac Corporation’s technical specialists, plus “know-how” and thorough research, your Vacuum-Purifier System is unique. Designed for unattended operation and suitable for operation on energized equipment complete monitoring equipment is also available.

Capacities
- Capacities: Standard units range from 50 gph to 3600 gph. Larger capacities or special models on application.
Single-Pass Performance:
- Standard Performance with New Oils with 100 ppm Water Content and fully saturated with air to 12% by volume.
  - Total Water Content: Max. 10 ppm by ASTM Method D-1533
  - Total Gas Content: Max. 0.25% by ASTM Method D-2945
  - Dielectric Breakdown: Min. 40 kV by ASTM Method D-877
- Optional Performance with New Oils with 50 ppm Water Content and fully saturated with air to 12% by volume.
  - Total Water Content: Max. 5 ppm by ASTM Method D-1533
  - Total Gas Content: Max. 0.15% by ASTM Method D-2945
  - Dielectric Breakdown: Min. 60 kV by ASTM Method D-877
Please feel free to contact for detailed specifications, accessories and options.