簡介
CMM-10
該裝置是一個獨立的單元，所有部件和操作組件都有金屬板保護，裝置的側面和後面有易於打開的氣動彈簧門。集裝箱式裝置可以安裝在符合《道路交通法規》的雙軸拖車上，並被拖到任何偏遠的地方。
我要諮詢該裝置是一個獨立的單元，所有部件和操作組件都有金屬板保護，裝置的側面和後面有易於打開的氣動彈簧門。集裝箱式裝置可以安裝在符合《道路交通法規》的雙軸拖車上，並被拖到任何偏遠的地方。
優勢
- 變壓器油的耐壓強度可以提高到70kV以上。
- 同時進行變壓器乾燥和油處理 。
- 在電氣設備中初次注入絕緣油處理。
- 對變壓器和其他電氣設備進行真空處理。
- 易於操作和服務。
| Parameter | Value |
| Capacity, m3/hour / gals. per hour: | |
|
10/2642 |
|
15/3970 |
| Processed oil parameters*: | |
|
0.1 |
|
10 |
|
1 |
| Oil output temperature in heating mode, ºС/ ºF | 90/194 |
| Outlet pressure, MPa | 0.4 |
| Oil heater power, kW | 180 |
| Max power consumption, kW | 210 |
| Residual pressure in vacuum chamber during degassing, mbar, max | 267 |
| Residual pressure in vacuum chamber during air tightness test, mbar, max | 26.7 |
| Air leak into the chamber in 1 hour, mbar max: | 267 |
| Electric power parameters | |
|
415 |
|
50/60 |
| Dimensions, mm/ft, max | |
|
4750/15’7’’ |
|
2100/6’11’’ |
|
2320/7’7’’ |
| Weight, kg/lbs, max | 3500/7735 |
Note: * initial oil parameters:
- volumetric gas content – below 5%;
- mass moisture content – below 01% (100 g/ton);
- temperature – above 0 ºС/ 32 ºF.
**All equipment sold in the USA is designed to operate on 60 Hz AC Power
The unit is built as a self-contained unit with all components and operating assemblies protected by metal panels and easy opening gas-spring loaded doors on the sides and back of the unit. The “Containerized”unit is placed on a tandem axle trailer that is street legal and ready to be towed to any remote location.
The unit consists of a vacuum chamber, input and output oil pumps, coarse and fine filters, oil trap, oil heater, pipelines with valves, vacuum pump section and a control cabinet.
ADVANTAGES
- transformer oil dielectric strength increase to at least 70 kV;
- transformer drying with simultaneous oil processing;
- initial filling of electrical equipment with insulation oil;
- evacuation of transformers and other electrical equipment;
- simple operation and servicing.
| Parameter | Value |
| Capacity, m3/hour / gals. per hour: | |
|
10/2642 |
|
15/3970 |
| Processed oil parameters*: | |
|
0.1 |
|
10 |
|
1 |
| Oil output temperature in heating mode, ºС/ ºF | 90/194 |
| Outlet pressure, MPa | 0.4 |
| Oil heater power, kW | 180 |
| Max power consumption, kW | 210 |
| Residual pressure in vacuum chamber during degassing, mbar, max | 267 |
| Residual pressure in vacuum chamber during air tightness test, mbar, max | 26.7 |
| Air leak into the chamber in 1 hour, mbar max: | 267 |
| Electric power parameters | |
|
415 |
|
50/60 |
| Dimensions, mm/ft, max | |
|
4750/15’7’’ |
|
2100/6’11’’ |
|
2320/7’7’’ |
| Weight, kg/lbs, max | 3500/7735 |
Note: * initial oil parameters:
- volumetric gas content – below 5%;
- mass moisture content – below 01% (100 g/ton);
- temperature – above 0 ºС/ 32 ºF.
**All equipment sold in the USA is designed to operate on 60 Hz AC Power