簡介
CMM-4,0LT
CMM-4,0LT可移動的工業用油淨化裝置設計用於對燃氣輪機和燃氣泵組件、燃氣壓縮機以及變壓器的潤滑系統、密封和液壓系統中使用的油進行過濾、熱和真空乾燥，當這些系統的運轉和維護過程中。
我要諮詢CMM-4,0LT可移動的工業用油淨化裝置設計用於對燃氣輪機和燃氣泵組件、燃氣壓縮機以及變壓器的潤滑系統、密封和液壓系統中使用的油進行過濾、熱和真空乾燥，當這些系統的運轉和維護過程中。
該裝置可用於通過加熱和真空除水、游離氣體和溶解氣體，並對熱油加熱和乾燥電氣設備，以及用高效能的過濾器去除固體顆粒。該裝置是為加工或處理油類的公司設計的。
同時，該裝置可以選擇安裝濕度感測器、燃油水分凝聚過慮器和觸控式螢幕控制。
優勢
使用功能性多樣。
體積小。
可移動式，方便現場環境使用。
| Parameter | Value | ||
| 1 Processing rate, liters/minute (gpm), not less than | |||
| – heat and vacuum drying and filtration mode | 70 (18,5) | ||
| 2* Processed oil parameters: | |||
| – ISO 4406 oil purity, at least: | 17/15/12 | ||
| – free water removal, % | 100 | ||
| – dissolved water and gas removal, not less than, % | 90 | ||
| 3 Process temperature range, ºС ( ºF) | |||
| – low limit | +10 (50) | ||
| – high limit | +70…+80 (158…176) | ||
| 4 Output pressure, bar (psi), not less than | 1,5 (21,8) | ||
| 5 Heater power, kW, max | 40 | ||
| 6 Maximum power requirement, kW | 46 | ||
| 7 Power supply parameters | |||
| – voltage, V | Customizable | ||
| – AC frequency, Hz | |||
| – phases | |||
| 8 Dimensions, mm (in), max | |||
| – length | 1700 (67) | ||
| – width | 900 (35) | ||
| – height | 1970 (78) | ||
| 9 Weight, kg (lbs), max | 600 (1320) | ||
Note- * initial oil parameters:
- volumetric gas content: less than 10,5%
- moisture content by weight: less than 0.005% (50 ppm)
- temperature: 0 ºС (32 ºF) and above
The CMM-4,0LT mobil oil unit is designed for filtration and thermal and vacuum drying of oils used in lubrication systems, seals and hydraulic systems of gas turbines and gas pumping assemblies, gas compressors, as well as transformers, in the course of operation and servicing of such systems.
The unit can be used to remove water, free and dissolved gas from oils by heat and vacuum, heat and dry electrical equipment with hot oil, as well as remove solid particles with highly efficient filters. This unit is designed for companies that process or handle oils.
The unit can be optionally fitted with moisture sensors, coalescent filter elements and touch screen controls.
ADVANTAGES
- versatility of use;
- compact size;
- high mobility.
| Parameter | Value | ||
| 1 Processing rate, liters/minute (gpm), not less than | |||
| – heat and vacuum drying and filtration mode | 70 (18,5) | ||
| 2* Processed oil parameters: | |||
| – ISO 4406 oil purity, at least: | 17/15/12 | ||
| – free water removal, % | 100 | ||
| – dissolved water and gas removal, not less than, % | 90 | ||
| 3 Process temperature range, ºС ( ºF) | |||
| – low limit | +10 (50) | ||
| – high limit | +70…+80 (158…176) | ||
| 4 Output pressure, bar (psi), not less than | 1,5 (21,8) | ||
| 5 Heater power, kW, max | 40 | ||
| 6 Maximum power requirement, kW | 46 | ||
| 7 Power supply parameters | |||
| – voltage, V | Customizable | ||
| – AC frequency, Hz | |||
| – phases | |||
| 8 Dimensions, mm (in), max | |||
| – length | 1700 (67) | ||
| – width | 900 (35) | ||
| – height | 1970 (78) | ||
| 9 Weight, kg (lbs), max | 600 (1320) | ||
Note- * initial oil parameters:
- volumetric gas content: less than 10,5%
- moisture content by weight: less than 0.005% (50 ppm)
- temperature: 0 ºС (32 ºF) and above