產品介紹∣信號分析儀器
Search
信號分析儀器

簡介

A4404 SAB

A4404 - SAB是一個袖珍型四通道振動分析儀。

通過USB將A4404 - SAB連接到任何一台電腦,並使用該設備進行數據分析、收集和記錄振動信號。該儀器通過動態平衡、上升和下降測量以及聲學測量模式的模塊得到加強。同時,該儀器配備了Adash所開發的專家系統,可以自動檢測機械故障。

該儀器由USB連接直接供電,因此不需要外部電源。

我要諮詢

A4404 - SAB是一個袖珍型四通道振動分析儀。

通過USB將A4404 - SAB連接到任何一台電腦,並使用該設備進行數據分析、收集和記錄振動信號。該儀器通過動態平衡、上升和下降測量以及聲學測量模式的模塊得到加強。同時,該儀器配備了Adash所開發的專家系統,可以自動檢測機械故障。

該儀器由USB連接直接供電,因此不需要外部電源。
訪問Adash官網,查看更多可靠性設備。

Input channels:

4 AC, ICP® power supply on/off
4 DC for process values
1 TACHO for external trigger
Input range:

AC +/- 12 V peak-peak

DC +1-24V

AD conversion:

24 bit, 64 bit internal signal processing

No AutoGain function!

Dynamic range S/N: 120 dB
Frequency ranges (-3 dB):

Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)

Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)

Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)

Sampling mode: Fully simultaneous for 4 channels
FFT resolution:

Min. 100 lines

Max. 3 276 800 lines

Unit modes:

Analyzer - analytic measurement

Data collector - route measurement

Balancer - on-site balancing

Recorder - signal recording

Stethoscope

FASIT - Expert system for fault detection

Octave analyzer

Bump test

ADS - Animated Deflection Shapes

Ultrasound

Processor:

According to the PC

Memory, Route: According to the PC hard drive
Data processing:

Real time FFT

DEMOD - ENVELOPE analysis

ACMT - low speed bearing analysis

Order analysis

RPM measurement

User band pass analysis

DC measurement

Orbit measurement

Signal recorder:

64 kHz sampling frequency

4 Ch memory consumption 3 GB/hour

4 Ch total recording - 35 hours

Trigger:

Manual, External, Signal level, Time

Use for signal recording trigger

Speed change, Time interval

Communication: USB
Temperature range: -10C to +50"c
Power: USB powered
Case: Aluminium heavy duty
Size & Weight: 110 x 115 x 35 mm, 350 g

The A4404 - SAB is a pocket sized 4 channel vibration analyzer.

Connect the A4404 - SAB to any computer by USB and use the unit for data analysing, collecting and the recording of vibration signals.The instrument is enhanced by modules for dynamic balancing, measurement of run up and coast down and acoustic measurement mode. The instrument is equipped with an expert system developed by Adash, which automatically detects
machinery faults.

The instrument is powered directly by USB connection so no external power is needed.
Please see more at www.adash.com and come back to us for further assistance with your purchase.

Input channels:

4 AC, ICP® power supply on/off
4 DC for process values
1 TACHO for external trigger
Input range:

AC +/- 12 V peak-peak

DC +1-24V

AD conversion:

24 bit, 64 bit internal signal processing

No AutoGain function!

Dynamic range S/N: 120 dB
Frequency ranges (-3 dB):

Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)

Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)

Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)

Sampling mode: Fully simultaneous for 4 channels
FFT resolution:

Min. 100 lines

Max. 3 276 800 lines

Unit modes:

Analyzer - analytic measurement

Data collector - route measurement

Balancer - on-site balancing

Recorder - signal recording

Stethoscope

FASIT - Expert system for fault detection

Octave analyzer

Bump test

ADS - Animated Deflection Shapes

Ultrasound

Processor:

According to the PC

Memory, Route: According to the PC hard drive
Data processing:

Real time FFT

DEMOD - ENVELOPE analysis

ACMT - low speed bearing analysis

Order analysis

RPM measurement

User band pass analysis

DC measurement

Orbit measurement

Signal recorder:

64 kHz sampling frequency

4 Ch memory consumption 3 GB/hour

4 Ch total recording - 35 hours

Trigger:

Manual, External, Signal level, Time

Use for signal recording trigger

Speed change, Time interval

Communication: USB
Temperature range: -10C to +50"c
Power: USB powered
Case: Aluminium heavy duty
Size & Weight: 110 x 115 x 35 mm, 350 g