Alpha + Beta 簡要規格

* 與 Alpha-N、Alpha-T 或 Beta-N、Beta-T 型組合使用

** 需要直流偏壓選購件 B

*** 詳見規格表

Alpha and Beta 介電分析儀類型

有以下不同頻率範圍的型號可供選擇。

Alpha and Beta 介電分析儀選項

有以下主機選項可供選擇：

備註：性能/價格比最佳的建議型號是 Alpha-NB 或 Beta-NB（20 MHz，帶直流偏移）。

Alpha 單機介電分析儀	Beta 單機介電分析儀

Dielectric Analyzers for Dielectric, Conductivity and Impedance Spectroscopy and Gain Phase Measurements

The Alpha analyzer features high quality general purpose dielectric, conductivity, impedance 2 electrode spectroscopy and gain phase measurements.

The Beta analyzer has the same functionality, but supports 3 and 4 electrode configurations in addition.

Both analyzers combine a high class precision broadband dielectric material characterization system with a typical impedance analyzer for the low and middle impedance range. This combination makes them unique and easy to use instruments with exceptional overall performance.

The Beta and Alpha analyzers cover 16 orders of magnitude impedance range, 13 orders of magnitude frequency range and 1m° basic phase accuracy in a single instrument. This combination makes them powerful tools for electric analysis instrumentation. As a result, the analyzers can measure the permittivity, conductivity and impedance of nearly all materials or components broadband and over a wide temperature range without changing sample geometry or sample cells.

3 or 4 electrode techniques can be advantageously used in order to partly compensate electrode - sample interface polarization or contact impedance effects.
The Beta analyzer voltage channel input impedance is 1012| 10 pF which exceeds the range of most competing instruments by several orders of magnitude and therefore can be seen as a major improvement in broadband 3 and 4 electrode measurements.

The Beta and Alpha analyzers are predecessors and  economical alternatives to the more powerful and flexible modular Alpha-A series, which can be extended by a series of test interfaces, which is not possible for the Beta and Alpha series. A more detailed comparison of the three series can be found here.

Features

• Broad frequency range 3⋅10-5 to 4⋅107 Hz including low frequencies for characterization of dielectric relaxations, electrochemical and high impedance effects.
• Ultra wide impedance range 10-2 Ω to 1014 Ω (16 decades) covers range from conductors to best isolators.
• Ultra wide capacity range 10-15 .. 1 F allows broadband measurement of smallest capacities down to 1 fF. 
• High phase and loss factor tan(δ) absolute accuracy (0.002 ° and 3.10-5, respectively) for low loss dielectric materials and isolators broadband characterization.
• Single integrated device operated by high level GPIB commands for easy and straightforward implementation in own programs or existing measurement set-ups. No additional customized software, frequency response analyzer, lock-in amplifier or interface required.
• Automatic self calibration and diagnosis by user cancels out long term internal drift and verifies functionality.
• Higher harmonics measurement over full frequency range for impedance and gain phase measurements for non linear electric response in materials or signals.
• Precision digital frequency response analyzer up to 40 MHz for two channel gain phase measurements with 0.001° phase - and 10-5 in amplitude resolution included.
• Optional control DETACHEM software for turnkey calibration, operation, data evaluation, 2- and 3- dimensional graphical representation.