簡介
ER25K
- 用於執行電塔的接地電阻測量，藉由保護導線的連接，能最大程度地降低鄰近鐵塔的影響。
- 只測量目標電塔的接地電阻，包括塔基。可於不中斷電力輸送、不斷開接地線的條件下，對每個電塔進行快速、安全、可靠的接地電阻測量。
- 操作頻率25kHz。
- 電阻讀值可達300Ω。
- 自動補償電感分量。
- 用於執行電塔的接地電阻測量，藉由保護導線的連接，能最大程度地降低鄰近鐵塔的影響。
- 設計特點：
- 快速、安全、可靠的接地電阻測試。
- 內建記憶體、印表機及可充電電池。
- 藍牙介面 - 可透過平板電腦進行遠端控制。
- 操作頻率25kHz。
- 電阻讀值可達300Ω。
- 自動補償電感分量。
- 自動電流注入。
- 系統介紹：
- ER25K基於使用高頻測量電流（25kHz）- 由於接地線電感阻抗在考量典型的長度跨距下相當高，能減少測量中鄰近鐵塔的影響。
- ER25K能只測量目標電塔的接地電阻，包括塔基。
- ER25K是在不中斷電力輸送、不斷開接地線的條件下，對每個電塔進行快速、安全、可靠的接地電阻測量的理想工具。
- 由接地電阻測試器注入的電流，會自動調節到預設的數值，測試器會直接在它的歐姆級刻度上指示電阻值。
- 藍牙介面及軟體，可用於儲存電塔照片、GPS座標資料及為每筆測量錄製語音說明。
- 測量範圍：0～300Ω。
- 操作頻率：25,000Hz。
- 測試電流：自動，20mA。
- 電感分量補償：
- 透過內建的電容器組。
- 最大容量：4.2μF，解析度10nF。
- 測量精度：±2.5% rdg. ±1位數。
- 顯示幕：字母數字顯示幕（LCD）。
- 輔助杆的最大接地電阻；2000Ω（電流杆），2000Ω（電壓杆）。
- 內建記憶體：最多可儲存2,000個測試讀值。
- 資料輸出：USB及藍牙介面，內建印表機。
- 軟體：透過平板電腦進行遠端控制的軟體，適用於Android 4.0冰淇淋三明治（API 14）或更高版本。
- 電源：內部可充電電池，12.6V，6000 mAh。
- 電池充電器：12V-2A（AC轉接器）。
- 詳細規格、配件、軟體及選購，歡迎洽詢。
- Perform earth resistance measurements of electrical pylons. The influence of adjacent pylons is minimized by a Guard cable connection.
- Design Features:
- Fast, safe, and reliable testing
- Built-in memory, printer and rechargeable battery
- Bluetooth interface for remote control via a tablet
- Operation frequency 25 kHz
- Resistance reading up to 300 Ω
- Automatic compensation of inductive component
- Automatic current injection
- System Overview:
- The ER25K is based on the use of a high frequency measurement current (25 kHz), for which ground wire inductive impedance –taking into account a typical length span is reasonably high, making it possible to reduce the effect of the adjacent towers under measurement.
- The ER25K measures only the ground resistance of the surveyed tower, including its base.
- It is the appropriate tool for fast, safe, and reliable grounding resistance measurement in each tower of a working line transmission, without disconnecting the ground wire.
- The current injected by the earth meter is automatically adjusted to the predetermined value and the equipment and it directly indicates the resistance value on its ohms-grades scale.
- Bluetooth interface and software gives you the capability to save photos of the towers and their GPS coordinates, plus record voice comments for each measurement.
- Measurement Ranges: 0 – 300 Ω
- Operation Frequency: 25,000 Hz
- Test Current: 20 mA Automatic
- Inductive Component Compensation:
- Through a bank of capacitors integrated into the equipment
- Maximum capacity 4.2 μF, Resolution 10 nF
- Measurement Accuracy: ±2.5% of reading ±1 digit
- Display: Alphanumeric Display (LCD)
- Max Earth Resistance of Auxilliary Rods: 2000 Ω (Current Rod), 2000 Ω (Voltage Rod)
- Built-In Memory: Up To 2000 Test Readings
- Data Output: USB and Bluetooth Interfaces. Built-In Printer.
- Software: Software for remote control via a tablet. Compatible with Android 4.0 Ice Cream Sandwich (API 14) or higher.
- Power Supply: Internal rechargeable battery, 12.6 V, 6000 mAh
- Battery Charger:12 V - 2A (AC adapter)
- Please feel free to contact for detailed specifications, accessories, software and options.