產品介紹∣超音波電暈|電弧檢測器

在嘈雜環境中使用也很適合。
為最理想的洩漏偵測工具，適用於任何預防維護性工作，應用範圍不勝枚舉。
使用電池電源操作，具最大的機動性。
操作簡單。
附帶雷射指示器的拋物面感測器，可執行最佳的精準定位測試。
測試應用：
- 電氣檢查：電暈效應定位、屏蔽件上的電弧。
- 通用機械檢查：馬達、壓縮機、齒輪、軸承監測。
- 氣體、空氣、壓力洩漏、沒有壓力或真空的洩漏檢測。
- 航空航天：飛機門窗、氣密性。
UD-1為超音波探測器，專設計用於電暈效應與電弧檢測，適合電力設施的預測性維護。
備有多種配件，為任何預防維護計劃的一款合乎成本效益的必備工具。
優點：
- UD-1能以極高精度從遠端進行“聽音”檢測，操作簡便，無需任何訓練。
- UD-1的優點之一 - 在嘈雜環境中使用，也很理想。
電弧及電暈效應檢測：
- 只須在可疑區域周圍掃描，便能精準定位及識別任何類型高壓設備都可能發生的電暈效應與電弧。
- UD-1感測器位在整合於機殼前方的指向性放大器圓錐內，另外配備的一個外部拋物面感測器，能讓使用者從較遠的距離，精準地定位出電氣瑕疵。
- 可拆卸式拋物面感測器與小巧的UD-1體積，方便在現場及進入任何類型設施操作使用。

動態範圍：96dB。
中心頻率：40kHz。
頻寬：38kHz～48kHz。
輸出頻率＠40kHz：2.4kHz。
取樣頻率：120kHz。
電池類型：鋰離子電池。
電池電壓及電流：3.6V 750mA。
充電電壓：5V。
電池續航力：4.0小時。
充電時間：2.5小時。
功耗：160mA。
靈敏度：
- 洩漏直徑0.005”@5 psi，3m。
- 洩漏直徑0.125mm@0.35 Bar，3m。
音頻輸出阻抗：32Ω。
音頻輸出位準：1V峰值-峰值。
音頻輸出中心頻率：2.4kHz。
詳細規格、配件、軟體及選購，歡迎洽詢。

Works just as well in noisy environments
Countless number of possible applications
Battery operated for maximum flexibility
Easy to use
Parabolic sensor with laser for optimal pinpoint testing
Test Applications:
- The applications of the UD-1 are countless and make it a global leak detection tool: a must for any prevention and maintenance department.
  - Electrical Inspections: corona effect localization, arcs on shields
  - General Mechanical Inspections: motors, compressors, gears, bearing monitoring
  - Gas, air, pressure leaks, leak detection without pressure or vacuum
  - Aerospace Sector: airplane doors and windows, air tightness
The UD-1 is an ultrasonic detector designed for corona effect and arcing detection for predictive maintenance in electric utilities.
Available with a variety of accessories, this instrument is a cost-effective must for any prevention plan.
Advantages:
- The UD-1 enables making remote acoustic inspections with great accuracy. The equipment is user friendly and does not necessitate any training.
- One of the advantages of the UD-1 is that it works just as well in noisy environments.
Detection of Electrical Arcs and Corona Effects:
- The UD-1 accurately pinpoints and identifies corona effects and arcs that may be encountered on any type of high voltage installation simply by scanning around the suspected area.
- The UD-1 sensor is positioned in a directional amplifier cone that is integrated in the front of the enclosure. An external parabolic sensor, which enables the user to pinpoint electrical defects from a longer distance, is also available.
- The dismountable parabolic sensor and the small dimensions of the UD-1 facilitate its use in the field and allows access to any type of installation.

Dynamic Range: 96 dB
Center Frequency: 40 kHz
Bandwidth: 38 kHz to 48 kHz
Output Frequency for 40 kHz: 2.4 kHz
Sampling Frequency: 120 kHz
Battery Type: Lithium Ion
Battery voltage and current: 3.6 V 750 mA
Recharging Voltage: 5 V
Autonomy: 4.0 hrs
Charge time: 2.5 hrs
Power consumption: 160 mA
Sensitivity:
- Dia. Leak 0.005” @5 psi 10 feet
- Dia. Leak 0.125 mm @0.35 Bar 3 meters
Audio output impedance: 32 ohm
Audio output level: 1 Volt peak-peak
Audio output center frequency: 2.4 kHz
Please feel free to contact for detailed specifications, accessories, software and options.