產品介紹∣SDT270 多功能超音波測漏儀
Search
SDT270 多功能超音波測漏儀

簡介

SDT270

SDT270 超聲波檢測儀,是現今世上最先進、功能最多、應用最廣泛的超聲波檢測系統,系統的功能及特點:

  • 探頭靈敏度極高
  • 可錄取存儲及分析超音波
  • 可儲存超音波值
  • 可把超音波轉成人耳能聽的聲波,並能即時判斷有否故障
  • 可把歷次測量資料建成資料庫管理,方便分析預測趨勢

我要諮詢

SDT270 超聲波檢測儀,是現今世上最先進、功能最多、應用最廣泛的超聲波檢測系統,系統的功能及特點:

  • 探頭靈敏度極高
  • 可錄取存儲及分析超音波
  • 可儲存超音波值
  • 可把超音波轉成人耳能聽的聲波,並能即時判斷有否故障
  • 可把歷次測量資料建成資料庫管理,方便分析預測趨勢

SDT270 是一台為預防性維護(PDM)而設計的可擕式超聲波檢測儀。系統同時具有紅外測溫功能和鐳射轉速測量,以獲取溫度和轉速資料。 SDT270 也是第一個包含一個SQL 資料庫的可擕式超音波檢測儀,這項功能允許同時收集多類型的檢測資料,包括:不同探頭的超音波強度、記錄的超音波音訊、溫度及轉速等資料,創建成資料庫,以便分析。
SDT270 是第一個以True Amplitude(全真振幅) 記錄的超音波檢測儀器,這項技術令超音波首次能夠以精確的音效檔保存在資料庫中,方便日後對超音波檔進行比較和趨勢分析。SDT270 每秒可捕獲多達25 萬個的超音波信號樣本。檢測結果是非常明確、精準且可比較的時間信號,這些信號存儲在系統龐大的內部記憶體中,以方便使用Ultranalysis Suite Software(UAS)軟體進行資料管理,音訊分析及生成報告。

功  能

多功能超音波探測儀

顯  示

高解析度、帶背光LCD,128×64圖元

鍵  盤

12個功能鍵

內置感測器

超音波感測器、溫度感測器(選配)、轉速感測器(選配)

外置感測器

通過特定的連接器(LEMO7針式連接器)

資料記錄

SDT270(SD,DD)存儲+靜態下載:20測量節點,每個測量節點可存多個資料,共可存4000個測量資料。SDT270(SU,DU)與資料庫軟體UAS配合使用:靜態測量(dBμV, ℃,RPM,dBA,SCFM,SCCM)超過10000靜態資料測量節點。動態測量(記錄波形):13分鐘。

通    訊

資料下載至電腦通過USB介面:(適用於SD和DD型)資料下載電腦並用UAS軟體分析:(適用於SU和DU型)

電    源

充電電池:4.8V 4400 mAh鎳氫電池使用時間:8個小時(使用背光會減少時間),標準容量:4.4Ah  ,壽命:500-1000次充電/放電迴圈保護:短路,反接或溫度保護

自動關機

預設時間自動關機

工作溫度

-15℃到+60℃

外  殼

軋製鋁材,橡皮保護套

尺  寸

226 x 40 x 90 mm(L x H x W)

重  量

約830克(含電池和皮套)
  • Measure Ultrasound, Vibration, RPM and Temperature in one box
  • 4 Condition Indicators for a more thorough diagnosis: (RMS, Max RMS, Peak, and Crest Factor)
  • Two Channel Inputs for sensors and accessories
  • Intrinsically safe version available for potentially explosive environments
  • Record clear, accurate, scaled, comparable Dynamic data in a wave format
  • Upgradeable firmware to flexibly grow with your program
  • Remote support and training
  • Device and sensors are calibrated to ensure consistent, repeatable performance
Built-In Measurements Ultrasonic sensor, infrared temperature sensor (optional) and Tachometer (optional) Minimum sensitivity Class I instrument exceeding ASTM 1002- 11 requirements for gas leak detection with the appropriate sensor
External Sensors 2 ports (Lemo 7pin connector)
Headphones high quality industrial headset having a Noise Reduction Rating (NRR) of 25 dB
Data Logger SS/SD at least 4000 Static measurements spread over 1000 locations
Intrinsically Safe ATEX certification meets directive 94/9/ EC (II 1 G Ex ia IIC T3/T2 Ga) comparable to Class I, Div 1, groups A, B, C & D
Data Logger DD idem SS/DD plus 15,000 seconds of Dynam- ic data @8k sampling rate or 3,700 seconds for 32k
Physical Characteristics Housing:  Extruded  Aluminum Weight: 830g /29.3oz (with battery & holster)
Dimensions: 226 x 90 x 40mm
(8.9 x 3.54 x 1.57 inches)
Data Logger SU/DU at least 10,000 Static measurements and 15,000 seconds of Dynamic measurements @8k sampling rate or 3,700 seconds @32k spread over 10,000 locations
Communication USB Interface Protective Casing Shock Resistant Silicone
Battery Pack Rechargeable 8 cell 4.8v, 4600mAh NIMH
Auto Power Down After preset time - adjustable by user
Safeguards (Battery) Short-circuit, reverse polarity & tempera- ture protection
Response Time <9 milliseconds