簡介
SDT200
- 標準內置的超音波感測器
- 內置紅外線測溫感測器
- 內置鐳射定位
- 一個外接感測器通道介面，可連接附加可選的感測器
- 400個節點位置的內部記憶體來儲存靜態測量
- 標準USB conntection
- 標準內置的超音波感測器
- 內置紅外線測溫感測器
- 內置鐳射定位
- 一個外接感測器通道介面，可連接附加可選的感測器
- 400個節點位置的內部記憶體來儲存靜態測量
- 標準USB conntection
SDT200超音波探測器可保護資產的安全。採用超音波技術，可以在造成意外關機前就預先聽到空氣洩漏趨勢並監視軸承狀況，能安全的檢查配電盤並按計劃安排維修。
ATEX認證：SDT200符合ATEX世界上最危險和潛在爆炸性環境中使用的規定。現在，超音波檢查員可以安心使用SDT200的獨特和高級功能在安全的區域中工作。
| 螢幕 | 高解析度,帶背光液晶顯示器 (128×64 圖元) |
| 鍵盤 | 12個功能鍵 |
| 內置的感測器 | 內置超音波感測器 |
| 外部感測器 | 通過特定的連接器連接（LEMO7針連接器） |
| 資料儲存 | 可存4000個測量資料 |
| 頻寬 | (-3dB) 2kHz |
| 頻率範圍 | 0 to 100 kHz |
| 測量模式 | 最大MAX/平均RMS |
| 通訊方式 | USB通訊介面 |
| 測量範圍,精度,測量解析度 | -20dBμV到120dBμV / ±0.5 dBμV / 0.1dBμV |
| 信噪比,回應時間 | -5dBμV 典型 / >10μs |
| 電池組 | 可充電電池(有短路、反接和溫度保護) |
| 工作溫度 | -15 °C to +60 °C |
| 重量 | 約830 g (含電池) |
| 尺寸 | 226 x 90 x 40 mm (長 x 寬 x 高) |
| 耳機 | 130 dB , 抗噪單雙耳式 |
| 外形結構 | 輕便手持，材料為拋光鋁 |
| 自動關機 | 可預設自動關機時間 |
Reducing your energy costs is a difficult challenge faced by many industries in today’s economy. But, it doesn’t have to be.
Undetected air or steam leaks, bearing failures and electrical panel faults cost you real money. There’s a way to cut these extra expenses from your energy bill.
Preserve the health of your assets with the SDT200 ultrasound detector. Hear air leaks, trend and monitor the condition of your bearings, safely inspect electrical panels and schedule repairs on your own terms, long before they shut you down – all with ultrasound technology.
ATEX Certified
The SDT200 meets the requirements set by ATEX for use in the most dangerous and potentially explosive atmospheres in the world. For the first time, ultrasound inspectors working in intrinsically safe-rated zones now have access to the unique and advanced features of the SDT200.
|
Function |
Multifunction detector |
Software for transferring data to PC |
DataDump Application |
|
Display |
Graphic LCD with backlighting (128 x 64) |
Auto power down |
Auto power down after preset time |
|
Keyboard |
12 function keys. |
Operating temperature |
-15 °C to +60 °C / 14 °F to 140 °F non condensing |
|
Built-in sensors |
Ultrasonic sensor, Pyrometer (according to the version) |
Housing |
Extruded Aluminum |
|
External sensors |
Through specific connector (Lemo 7 pin connector) |
Dimensions |
226 x 90 x 40mm (8.9 x 3.54 x 1.57 inches) |
|
Data Logger |
– 20 Measurement Nodes (measurement points) |
Weight |
±770 g / 27 oz. |
|
Communication |
USB interface |
Headphone |
Noise isolating, NRR 25 dB (tested in an accredited NVLAP laboratory) |
|
Battery pack* |
Rechargeable battery type: 8 cell, 4.8 V, NiMH (Nickel Metal Hydride) |
* |
for optimum performance, this battery pack is equipped with an electronic management system (includes digital serial number, capacity and temperature management). |