FET-C提供自動化最終電氣測試解決方案 / FET-C Final Electrical Test station

FET-C

The FET-C Final Electrical Test station is the baseline model for the C series of automated production line test stations. With a very small facilities footprint and high-speed (2,000 parts per hour), unattended operation, this is truly an economical machine to operate.
Airbag initiators to be tested (either Amphenol or exposed pin types) are loaded "loose" into a vibratory feed bowl. The initiators are then automatically aligned and loaded onto a precision timing-belt conveyor for testing.

FET-C系列機器增加完全集成的視覺檢測站 / FET-C Vision Option

FET-C Vision Option

The FET-C Vision Option adds a fully integrated vision inspection station to the FET-C series machines. Part orientation, pin spacing, pin straightness, pin twist and feature detection may be provided in one location with a programmable machine vision station and LED illuminator.

FET-C系列機器增加完全集成的X射線檢測站 / FET-C X-ray Option

FET-C X-ray Option

The FET-C X-ray Option adds a fully integrated x-ray inspection station to the FET-C series machines. Internal characteristics such as powder presence, ground pin location, charge sleeve orientation and other features may be evaluated.

低成本多功能組裝或測試平台 / DT501

DT501

Designed as a low cost, versatile assembly or test platform, this very small (45x22x24) machine provides astounding precision and features in a desktop format with capabilities to 1,000 parts per hour. Removable quick-change tooling is used for different part types.

ESD-804自動化靜電放電測試系統 / ESD-804

ESD-804

The Santa Barbara Automation Electrostatic Discharge Test System is a fully automated instrument that will lower your testing time and cost, reduce operator error and increase overall test confidence. Rugged 3/4 inch acrylic enclosure with massive door latch, chamber vent and safety interlock. PLC controlled with full maintenance mode included and optional PC interface. Tooling may be exchanged for different part types quickly and easily.

FET-20高通量航空航天和汽車啟動器測試 / FET-20

FET-20

The Santa Barbara Automation FET-20 provides high throughput (up to 2900 parts per hour) aerospace and automotive initiator testing. The FET-20 incorporates conveyor, electrical test and manual reject on a single small frame. Testing of multiple types of pin lead and wire lead devices is supported.

FET-16手動裝載和卸載的最終電氣測試機器 / FET-16

FET-16

The Santa Barbara Automation Model FET-16 is a manually loaded and unloaded final electrical test machine with intermediate production rates (up to 950 parts per hour). Both pin lead and wire lead initiators can be tested in a wide variety of sizes and shapes.

LM-B雷射打標機提供無人化的高速零件裝載和加工 / Laser Marker

LM-B

The Santa Barbara Automation Model LM-B Laser Marker provides unattended high speed part loading and processing, precision laser marking and offload to a finished parts bin on a single small frame at rates to 1800 parts per hour.

Precision positioning with accurate and repeatable mark placement.
Modern, reliable solid state laser system.
Simple operator interface with touch-screen graphics and light tower for machine status.
Complete part tracking and control.
Optional long-life diode pump for single-phase power and no external water requirements.
Vibratory feed from large capacity bowl. Automatic part orientation on vibratory feed track.
Part statistics with count and run rate are continuously updated.
Maintenance Mode provides total machine control for troubleshooting and adjustment.
Welded steel frame designed to minimize vibration.

SA自動密封膠黏著器 / SA自動密封膠黏著器

SA

The Santa Barbara Automation Model SA Automatic Sealant Applicator provides high speed part handling, fluid dispensing and cassette load on a single small frame at rates to 1800 parts per hour.